Posted in Tutorials

Water Colour Letter Art – Tutorial

Hi everyone 🙂 How are you all going? It’s the middle of Winter here in Australia so it is perfect weather for snuggling up in front of the fire with a project. So on that note, I thought I would share a quick tutorial on my version of those cute water-colour and word art works that are all over Pinterest at the moment. Here goes 🙂

You will need…

  • Water colour paper (pre-stretched to minimize buckling)
  • HB pencil
  • Black Fine line marker (make sure it’s one that doesn’t bleed)
  • Water Colour paint (I used pans, but tube paint is fine too)
  • Medium paint brush
  • Ruler
  • Eraser
  • Water

First, using the pencil, lightly rule some guide lines across your page. With your pencil again, lightly draw in your desired text/quote, take care to center it both vertically and horizontally. When you are happy with your text draw over it again with the pencil to darken the letters. Erase the guide lines but LEAVE THE PENCIL LETTERS ON THE PAGE.

IMG_1447

Now take your brush and dip it in clean water. Paint with water, roughly making a circular area wet. Now paint over the wet area with water-colour. Be creative! Drops of clean water on the wet water-colour paint gives interesting effects!

IMG_1449

When you are happy with how it looks, leave it to dry on a flat, level surface. Now that your watercolour is dry, carefully draw over the penciled letters with a black permanent marker. It is a good idea to test your marker out on another piece of water-colour paper.

IMG_1451.JPG

When you are finished allow the marker to dry completely…. And you are finished!

IMG_1453.JPG

 

 

I hope that you enjoyed this tutorial and that it make you want to give water-colour a go 🙂 If you do use this tutorial I’d love to see how yours went, post a photo below or tag me on instagram @friedas_frills

Have fun,

Gill

http://www.etsy.com/shop/FriedasFrills

Posted in Tutorials

Tutorial-Toadstool Pincushion

Hello everyone 🙂 Today I thought that I would show you how you can make your own toadstool. You can use this as a cute little pincushion or just as an adorable decoration!

IMG_20160530_161814315

So here is what you will need:

  • Red Felt
  • White Felt
  • Cardboard
  • Toy Fill/ Stuffing
  • Scissors
  • Needle
  • Red Thread
  • Craft Glue suitable for Fabric (Hot Glue is fine too)
  • Toadstool Template

So first up you need to print the template and the cut out all the pieces. Now cut the top out in red felt and cut three large spots, two little spots and the stalk all in white felt. You will also need to cut the base out in cardboard.

IMG_20160530_154414334 (1)IMG_20160530_154715064

Now lets put it together…

IMG_20160530_155452812Thread the needle, and knot the end. With long stitches sew all the way around the top

until you are back where you started.  (As shown in the picture above). Pull the thread tight so the top starts to gather and put a small amount of toy-fill or stuffing in.
IMG_20160530_155551536Place the cardboard circle inside on top of the stuffing, pull tight and tie off the thread. Glue all around the edge. IMG_20160530_160404094

Now take the stalk and put glue on one side, going from one end to the
other in a zig-zag pattern. Starting at one end carefully roll the stalk up all the way until you are almost at the end. Put some more glue on the end an roll it closed.

IMG_20160530_160619345Okay, so now glue the stalk to the middle of the cardboard which is still showing on the bottom of your toadstool and let ALL the glue dry COMPLETELY.

You’re almost finished! Grab your spots and glue them on however you would like. Wait until its all dry, and you’re done! 🙂

I hope you enjoyed this tutorial, and don’t forget to check out our Etsy Shop. Thanks for stopping by. 🙂IMG_20160530_161432999